Stainless Steel Flag Poles

Stainless Steel Flag Poles/ Chrome Flag Poles

The Stainless Steel Flag Poles are produced of AISI 304 and AISI 316 quality stainless steel tube and again stainless steel reducer fitting is used at the combining of poles. The stainless steel flag poles have the endless rotating top system turning around 3600, the internal halyard drum of which the patent is owned by ENTI Engineering, the base flange covering rosette and hinged base flange which manufactured by stainless steel. According to the customers demand, the stainless steel poles are polished in our workshop as brush finish and shiny, the stainless steel flag poles which are produced 3m to 13m as standard can be manufactured according to the orders as polygonal and up to 80m tall.

Technical Specifications

Pole Height :3m – 13 m.
Pole Type : Circular section tubular pole. / Circular conical pole
Material : AISI 304 Quality Stainless steel/AISI 316 Quality Stainless steel
Ground connection : Anchor Bolt and Base flange for foundation connection (optional with hinge- up to 8m).
Surface Protection : Hot Dip Galvanised at EN ISO 1416 (galvanised Under ISO Standards) / Electro Galvanised.
Surface Coating : Electro-static powder coating / Primary + Epoxy
Surface Process : Mirror polish /satin polish (brush finish)
Bolt / Anchorage : ISO 898. 1 /5.8

Technical Properties

Other Specifications:

Statical calculations: EN 40-3-3, ANSI/TIA 222-G, ASCE - 72
Projects according to wind speed 130 km/hr or in compliance with wind speed of 160 km/hr
Internal halyard system.
Hand-driven / electro mechanic flag lowering-raising system

Places where they are used
	Airports
	Ports
	Parks and gardens
	Squares
	Industrial Plants and sites
	Sports' fields
	Small scaled sports' fields
	Spor sahaları
	Military zone
	Memorial
	Patios- and private properties

Stainless Steel

The steel alloys the combinations of which consist of at least 10.5% chrome. They show a major strength against corrosion comparing to non-alloyed steels owing to the divers chemical combinations. The CR in the combination makes the steel stainless and increasing the amount it, the resistance against corrosion may be increased. The superior corrosion resistance may provide a very filmy, flexible, intense oxide layer which is strongly caught the surface. This very filmy layer can recover itself due to the suitable circumstances.

The Ni can provide flexibility and formability easily. In addition to the increment of Cr amount, the Ni amount together with Mo, Cu, Ti, N, Al, or separately can be added and thus strength can be

increased; this gives a possibility to produce products for all requirement.

The stainless steels can be classified in four main groups.

• Austenitic
• Ferritic
• Ferritic-Austenitic
• Martensitic

When compare to the other steels, the stainless steels have diverse mechanical properties in addition to a perfect anti-corrosion feature, usage of both low and high temperature, easy formability, aesthetic appearances, easy clean- ability which makes it hygienic, and are recycled and environmentally friendly. These properties of stainless steel make it preferable.

Stainless Steel Flag Pole Base Cover (Rosette)

• Square ( standard implementation) or circular (optional, to hide base flange and anchorages)
• Hinged system ( under the decorative cover)

Decorative Stainless Steel Cover

• Hinged
• With Lock Mechanism
• Hand-driven (crane) mechanism to coil up the cable within, for 168 mm and bigger diameter
• Ram horn within the pole or cable locking system (cam Cleat) for 168 mm and smaller diameter
• Satin or mirror polished exterior surface

Endless Rotating Peak System

• Stainless steel Top system
• Has 50 kg tensile strength
• 3 pieces hidden reels preventing cable break out
• Two ball-bearings ensuring to turn around 3600
• Adaptor for overall peak diameter

Constant Reel Top System

• Stainless Steel Peak Decorative Knob and Constant Reel
• Suitable for overall peak diameter

Stainless Steel Wall Flag Pole (1-6m)

Stainless Steel Wall Flag Poles are manufactured of AISI 304 and AISI 316 quality stainless steel tube with constant reel and 1 to 6 m tall and are mounted on the wall by wall type stainless steel flange and chemical dowel. The flag poles are designed to withstand wind speed of 130 km/hr and on the field of 5m2. According to the customers' demand, the custom projects of large dimensions are manufactured to withstand big flags. The ground basic projects and static figures are prepared as project then presented to our customers in accordance with the customers demand.

• Our poles are manufactured by combining round profiled stainless steel tubes.
• The flag poles are designed to withstand wind speed of 130 km/hr and on the field of (2X3) 6m2. Alternative designs for larger dimensions' flag are manufactured.
• Wall mounting is made by concrete dowel.

If requested, the static figures are provided by us after order