Giant Flag Poles

Please click here to see 100 mt Flagpole Photo Gallery.

Giant Flag Pole

According to the customers demand, ENTI engineering produces giant flag poles at the dimension of 18m to 150m by nesting tightly polygonal modules (slip-joint) in to one another as galvanised or stainless steel by its competent staff. Our Giant Flag Poles are designed to withstand according to the wind speed of 160 km/hr and 50 sq/m2 to 2000sq/m2 flag surface. According to the customers demand, the ground basic projects and static figures are prepared as project then presented to our customers. Being aware of that the flag is important for every nation, Our Company shows important and meticulous works on the orders received.

Flagpole Catalog

Technical Specifications

Pole Height :1 8m – 150 m.
Pole Type :Steel pole formed by slip-joint connection of polygonal modules.
Material : St 37 - S235JR - EN 10025 / St 52 - S355JR High Strength Steel / AISI 316 Quality Stainless steel/AISI 304 Quality Stainless steel
Ground connection : Anchor Bolt and Base flange for foundation connection (optional with hinge- up to 8m).
Surface Protection : Hot Dip Galvanised at EN ISO 1416 (galvanised Under ISO Standards) / Electro Galvanised.
Surface Coating : Electro-static powder coating / Primary + Epoxy
Surface Process : Mirror polish /satin polish (brush finish)
Bolt / Anchorage : ISO 898. 1 /5.8

Other Specifications:

Statical calculations: EN 40-3-3, ANSI/TIA 222-G, ASCE - 72
Projects according to wind speed 130 km/hr or in compliance with wind speed of 160 km/hr
Raising and lowering mechanism (Highmast) /control panel
Optional aircraft warning lamp
In compliance with the connection of the Lightning Rod
Optional internal halyard system.
Optional automated or hand-driven flag lowering-raising system

Note: The statical project and foundation dimensions are provided by our project team after your order.
Foundation manufacturing and erection services are provided.

Endless Rotating Top System

The system that flags can turn round without being twisted; the flag may turn together with the cable tied to the direction that wind blows owing to the ball-bearing system and reels located on the top of the pole. One end of the cable goes down within the body of pole and then is connected to the hand driven system or electro-mechanic lift system at the base of the flag pole ( it is connected to the cleat at the small poles). The other end of the cable goes up to the top of the pole to carry the flag then is tied to the pole aligning to the bottom of flag as it can be rotated around. Thus, the cable is not seen around the pole except the alignment of the flag in the mean time the flag may rotate 3600 in compliance with the wind. The aircraft warning lamp may be mounted to the top of the pole optionally.

Places where they are used
	Airports
	Ports
	Parks and gardens
	Industrial Plants and sites
	Sports' fields
	Small scaled sports' fields
	Military zone
	Memorial
	Patios- and private properties